CONFIGURATION WITH SMS OR DATA CABLE
1.) CONFIGURE WITH SMS COMMANDS:
Turn ON your GPS tracker and follow these steps carefuly. Send all SMS commands to the tracker correctly:
resets all settings to factory default
sets the required APN for GPRS configuration
1
sets the USER NAME for GPRS configuration (optional)
1,2
sets the PASSWORD for GPRS configuration (optional)
1,2
adminip123456 89.134.146.57 31201
sets our server's IP address and Port number
sets the report time interval to 30 seconds
3
1 The "xyz" depends on your mobile phone company, for more information ask your SIM supplier or check their website!
2 Do not send this messages if you don’t need USER NAME and PASSWORD for the GPRS connection!
3 The report interval must NOT be less than 5s for TK102-2 and not less then 30s for model TK102
4 ”123456” is the default password, if you changed you need to use your chosen one
5 Do not forget to use "spaces" in the commands!
--------------------------------------------------------------------- OR ---------------------------------------------------------------------
2.) CONFIGURE WITH PC AND USB DATA CABLE:
Connect the tracker:
1.) Install the Prolific USB Driver downloaded from our website
2.) Connect the serial cable to the PC
3.) Open the Windows „Device Manager”
4.) Check the COM port number at „Ports (COM & LTP)”
5.) Run the „Access Port” software downloaded from our website
6.) Setup the right COM port number at ”Tools / Configuration„ menu and click „OK”
7.) Connect the serial cable’s longer lead to the GPS tracker
8.) Power ON the GPS tracker with the ON/OFF button
9.) When you see the "AT+CREG?" text in the "AccessPort" software enter the commands below:
Click to "Send" button after each command!
resets all settings to factory default
sets the required APN for GPRS configuration
1
sets the USER NAME for GPRS configuration (optional)
1,2
sets the PASSWORD for GPRS configuration (optional)
1,2
adminip123456 89.134.146.57 31201
sets our server's IP address and Port number
sets the report time interval to 30 seconds
3
1 The "xyz" depends on your mobile phone company, for more information ask your SIM supplier or check their website!
2 Do not send this messages if you don’t need USER NAME and PASSWORD for the GPRS connection!
3 The report interval must NOT be less than 5s for TK102-2 and not less then 30s for model TK102
4 ”123456” is the default password, if you changed you need to use your chosen one
5 Do not forget to use "spaces" in the commands!
Disconnect the tracker:
10.) Click on the "Serial Port Switch" button if you finished the setup
11.) Remove the serial cable from the GPS device
12.) After you removed, the tracker starts to send data to our server automatically
13.) Remove the serial cable from the PC
SERVER IP ADDRESS: 89.134.146.57 SERVER PORT NUMBER: 31201
(37 pagine)
(13 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale